Peavey PR 12D

• Bi-amplified Class D powered system with 200 watt total power

• Both power amps have DDT compression

• 12″ heavy duty woofer with 2.375″ voice coil

• Woofer servo for reduced woofer distortion

• Automatic equal loudness (Fletcher-Munson)

• RX 14 1.4″ titanium compression driver

• Peak SPL up to 120 dB with music!

• Combo jack with 1/4″ TRS & female XLR mic- or line-level balanced input

• Two 1/4″ phone jacks for link-out/direct-in capability

• Molded-in horn with exceptionally smooth response and pattern control

• Top and sides handgrips

• Pole mount molded-in

• Reduced weight

• Top and bottom flying point inserts

DESCRIPTION

The Peavey PR 12D is a powered, bi-amplified, two-way speaker system engineered to provide very high levels of performance in a compact powered loudspeaker. The PR 12D is capable of up to 120 dB peak SPL. The enclosure utilizes tough polypropylene in an injection-molded plastic trapezoidal form, with a coated steel grille to offer an attractive yet-durable powered speaker system.

This two-way powered system is comprised of a 150 W class D power amplifier driving a 12″ heavy duty woofer. The RX™14 compression driver is driven by a 50 W class D power amplifier and features a 1.4” titanium diaphragm coupled to an extremely smooth and well-controlled constant directivity horn (with a coverage pattern of 90˚ by 40˚) that is molded integrally into the enclosure.

A balanced input to the preamp/EQ electronics consists of one combo female XLR and 1/4” TRS phone jack. It is switchable between mic-level and line-level sensitivity. Two 1/4” phone jacks are provided for link-out / direct-in capability. The link-out is post- level and pre-crossover. While the direct-in is a direct pre-crossover input.

A woofer servo senses back-EMF from the woofer voice coil that is not a result of the drive signal, and subtracts the error so that the woofer cone follows the drive waveform precisely.

Constant Loudness (Fletcher-Munson) circuit for accentuating bass and treble at low listening volume levels.

The power amplifiers providing the bi-amplification are low-distortion units providing 150 W continuous RMS into the nominal 8 ohm load of the woofer, and a 50 W continuous RMS into the nominal 8 ohm load of the tweeter. They were selected for their reliability and superb musical performance capability. Both amplifiers feature DDT™ compression, which virtually eliminates audible power amplifier clipping.

A molded-in handle provides ease of transport, while multiple mounting points (top and bottom) for the Peavey Versamount™ allow maximum utility.

APPLICATIONS

The Peavey PR®12D has a variety of applications such as sound reinforcement, public address, side fill system, karaoke or musical playback. With the optional monitor stand kit, the Peavey PR 12D makes an excellent stage monitor. A typical signal source for the line-level inputs of the Peavey PR 12D would be a sound reinforcement mixing console (mixer) or the output from a CD player, iPod player or tape deck. A dynamic microphone can be connected and used as well.